Cable Tie Mounting Bases Our 4-way mounting bases are available in four sizes to accommodate T18 through T150 series cable ties. Insertion of ties can be made from all four sides. Each mount may be secured with two screws or adhesive backing for ease of application. Standard color: white. The 2-way mounting bases are secured with one screw or and adhesive backing and allow ties to be inserted from two sides. Standard color: white. Please call for more information.
	Cable Tie Mounts The Cable Tie Mount series is designed to provide stability to wire bundles. These mounts can accommodated miniature, intermediate, or standard cross-section cable ties. Each mount is secured with a single screw. Standard color: white. Please call for more information.
	Masonry Mounts Masonry mounts provide a permanent method of attaching wire and cable to masonry surfaces. Our masonry mounts simply tap into pre-drilled holes and can be used for indoor and outdoor applications. Standard color: black. Please call for more information.
	Low Profile Cable Tie Mounts Low profile mounts are intended for use in securing bundles where space is limited. Each mount is fastened with a single screw. Standard color: white. Please call for more information.
	Low Profile Rivet Mounts The low profile rivet mount is designed to secure wiring bundles and fastens with the drive rivet through a pre-drilled hole. This mount is ideal for use in applications where space is limited. Standard color: natural. Please call for more information.
	Push Mounts Intended for use in a pre-drilled hole, this push mount accepts T18 though T50 series cable ties. Once inserted through the hole, the mount locks into place. Standard color: white. Please call for more information.
	Push Button Mounts The push button mounts are used where the back of the panel is accessible. Standard color: white. Please call for more information.
	Cable Tie Anchor Mounts Cable ties may be inserted from any of the four sides of the cable tie anchor mount. This feature allows the mount to be placed either parallel or perpendicular to the wires. Standard color: white. Please call for more information.
	Cable Tie Anchor Plates These plates have slotted mounting holes to provide for easier alignment of mount and bundles. Once aligned, they are fastened securely by tightening the applied screw. The CTAP2 allows and additional screw for maximum stability. Both plates are used perpendicular to the wire bundle. Standard color: white. Please call for more information.
	Military Specified Mounting Plates Military specification plates are designed for securing closely spaced cable and wire bundles. They can be used with through T120 series cable ties and are fastened with screws. Standard color: natural. Please call for more information.
	Lashing Tie Mounts The lashing tie mount is designed to snap into the T250 lashing tie. The tie head is assembled perpendicular to the mount. The strap assumes a position parallel to the mount when inserted into the head. The lashing tie mount is recommended for indoor or outdoor wall mount cable tie applications. Manufactured from UV stabilized nylon 6/6, the lashing tie mount has a flame rating of 94V-2. Standard color: black. Please call for more information.
	Heavy Duty Mounts Our heavy duty mounts were developed in conjunction with the T250 and T255 series cable tie to harness wires and hoses. These mounts contain a small tab inside the mounting hole to temporarily engage threads, which allows assemblers to preinstall the mount on a stud before securing with a washer and nut. The heavy duty mounts accept all standard cable ties up to 1/2" wide. Standard color: black. Please call for more information.
	Grip Tie Mounts To secure bundles to flat surfaces, Cable Markers Company offers a mounting base to be used with our Grip Ties. Available with or without adhesive, two sizes of Grip Tie Mounts cover every size of Grip Tie. The mounts are manufactured from Nylon 6/6 material and are UV-stabilized for outdoor applications. Please call for more information.