|
Click here to return to Wire & Cable I.D. Products
| Flex-Tag Markers |
 |
The Flex-Tag marking
system is a non-adhesive, labor-saving method for identifying wire and cable.
Used with Tagprint software, The Flex-Tags work as an
efficient, computerized system. Flex-Tags can also be marked with a typewriter or pen. |
Manufactured
from a 25mm thick, white plolyester, Flex-Tags provide a scratch resistant surface which
resists dirt, UV light, and a variety of solvents.
Delivered on fan-folded, pin-fed cards, Flex-Tags are sturdy, yet thin enough to
work with most printers. However, 9 pin printers are recommended.
Intallation
Tapered slots are on the end of each marker. To install the Flex-Tag, just bend the
card, insert the wire into the tapered slots, and pull. Easy to use, the Flex-Tag system
provides permanent identification without sorting, loose markers, or waste. |
 |
| Part No. |
Wire
Diameter
In. (mm) |
Approx.
Wire
Guage |
Dimensions - In. (mm) |
Pkg. Qty. |
| A |
B |
C |
D |
E |
| TFT-700 |
.008"-.029"
(.2 -.75) |
18
or
Smaller |
.91"
(23) |
.205"
(5.2) |
.15"
(3.8) |
.512"
(13) |
.094"
(2.4) |
4500
Pcs. |
| TFT-710 |
.029"-.06"
(.75 -.1.5) |
16
- 12 |
.91"
(23) |
.205"
(5.2) |
.197"
(5.0) |
.435"
(11) |
.14"
(3.5) |
4500
Pcs. |
| TFT-715 |
.06"-.098"
(1.5 -2.5) |
12
- 10 |
.985"
(25) |
.226"
(5.7) |
.24"
(6.0) |
.435"
(11) |
.169"
(4.2) |
4500
Pcs. |
| TFT-720 |
.103"-.24"
(2.6 -6.0) |
8 |
1.03"
(26) |
.275"
(6.9) |
.259"
(6.6) |
.435"
(11) |
.217"
(5.5) |
4500
Pcs. |
| TFT-730 |
.24"-.630"
(6.0 -16.0) |
8
- 6 |
1.75"
(44) |
.476"
(12) |
.435"
(11) |
.67"
(17) |
.323"
(8.2) |
1500
Pcs. |
Click here to return to Wire &
Cable I.D. Products
|