heatmain
HG 3002 LCD
• Continuously variable temperature
• Continuous LCD temperature output indicator
• Continuously variable air flow
• Cool-air stage

blackbar.jpg (946 bytes)		 hg3002.jpg (7725 bytes)
Technical Specifications
Voltage: 120 VAC
Output: 1,500 watts
Temperature:
Stage 1: 120° F
Stage 2: 120° F - 1100° F
(5 mm [1/5"] in front
of the ejector tube)		 UL CSA Listed
Temperature Display:
LCD Continuous Display
Blowers: cont. adjustable
Air Flow: min 7 cfm, max. 17.6 cfm
Weight: 31 OZ.
Noise: <70 dB (A)

Note: Not all of our nozzle tips are listed below. If you are looking
for a specific nozzle tip that is not listed, please give us a call.

07051.gif (2723 bytes) Part No. 07051

20mm (1-1/4") reflector nozzle with a 1-1/2" reflector for medium diameter shink tube applications. The reflector can be adjusted for smaller diameter tubing.

Note: this nozzle cannot be used with other heat gun brands.
07061.gif (3242 bytes) Part No. 07061

9mm (3/8") reflector nozzle with a 1-1/2" reflector can be easily formed for shrinking small diameter tubing. This is a totally enclosed nozzle with no vents for deflecting excess hot air into the working area. The reflector is removable to allow applications of direct pin point heat to a surface.

Note: this nozzle cannot be used with other heat gun brands.
07062.gif (3023 bytes) Part No. 07062, 07071, & 07081

These reduction nozzles are designed to provide a totally concentrated pin point air flow. It comes in 3 sizes. 9mm (3/8") is Part No. 07062, 14mm (5/8") is Part No. 07071, and 20mm (3/4") is Part No. 07081.

Note: this nozzle cannot be used with other heat gun brands.
07461.gif (3067 bytes) Part No. 07461

14mm (5/8") reflector nozzle with a specially designed tip to provide efficient and quick heat to solder sleeve wire connectors. This is a totally enclosed nozzle with no vents for deflection excess hot air into the working area.

Note: this nozzle cannot be used with other heat gun brands.
07301.gif (3038 bytes) Part No. 07301

75mm (3") reflector nozzle with a 1-1/2" reflector for large diameter shrink tube applications. The reflector can be adjusted to efficiently shrink small diameter tubing.

Note: this nozzle cannot be used with other heat gun brands.
01450.gif (4892 bytes) Part No. 01450

This Heat Gun stand adds convenience and stability to benchwork applications in three positions. The stand is made of metal and is designed so the user can place the Heat Gun in one or three positions: left, right, or upside down.

Note: this nozzle cannot be used with other heat gun brands.